Product Description: Download PDF
These products are a range of premium quality, low pour point compressor oils.
Lubricants for compressors vary dependant upon the type of compressor e.g. reciprocating, rotary, screw and also the gas being compressed e.g. air, nitrogen and refrigerants etc. With these features firmly in mind the range of Refridge oils have been designed for a wide range of manufacturers specifications and requirements.
This product range of compressor oils are manufactured using carefully selected napthenic base oils that possess inherently low temperature capabilities. They reduce the formation of ice crystals if water is present in the lubricant and remain fluid even at the lowest temperatures encountered in their operating cycle.
Rockdrill Range
Product Description: Download PDF
Rockdrillis an extreme pressure treated rock drill and pneumatic lubricant.
On pneumatic tools, due to the expansion of air, the temperature may be considerably lower than ambient. Rockdrillis formulated to be free flowing through airline lubricators and integral oilers under these conditions.
A second characteristic of air is that the relative humidity increases with decreasing temperatures and unless the air has been specifically dried, water vapour will condense out into the working surfaces of the pneumatic tool. Rockdrilloil has been formulated to protect against corrosion and to withstand high pressures in sliding vane air motors. In all applications the importance of choosing the correct viscosity is emphasised to ensure maximum operating efficiency of equipment.
SPRAYBLE Gear Lube
Product Description: Download PDF
Sprayable Gear Lube is a semi-fluid aluminium complex grease made from solvent refined hydrocarbon oil fortified with solid lubricants, polymers, extreme pressure additives, anti-oxidants and corrosion inhibitors.
SYNGEAR PAO Range
Product Description: Download PDF
The Syngear PAO range consists of synthetic, high performance gear lubricants designed to operate in extreme conditions whilst maintaining optimum component and lubricant life. The Syngear PAO range of lubricants contain a carefully balanced, state-of-the-art additive system which is designed to protect against scuffing and reduce fatigue related failures caused by issues such as micropitting.
TRANSFORMER OIL
Product Description: Download PDF
This product is a specially formulated, low viscosity uninhibited transformer and switchgear oil. Are manufactured using special napthenic base oils which possess extremely good electrical conductivity. It is manufactured under strict conditions to meet the stringent BS 148 class I and II specifications.
Ultra Hi-Load 32
Product Description: Download PDF
This product is a specially formulated, low viscosity uninhibited transformer and switchgear oil. Are manufactured using special napthenic base oils which possess extremely good electrical conductivity. It is manufactured under strict conditions to meet the stringent BS 148 class I and II specifications.
NOTE:
Care should be taken to avoid even the smallest contact with water. Once opened, the product is prone to contamination with moisture form the air.